Bezel Ring Removal Tool for Surefire KT1, KT2, KT3, KT4, KT5 Head Units

Precision machined from aerospace grade 7075 aluminum with flat black anodization.
Allows for the removal of stock and aftermarket bezel rings without damaging your flashlight.

Recommended instructions:
Heating the bezel is recommended for removal of the stock Surefire bezel rings, because they are glued in place.
Put bezel in a dish of hot boiling water for 3-5 minutes.
Carefully handle flashlight with gloves or oven mitts.
Insert a screw driver into the bezel removal tool.
Rotate the tool counter-clock-wise to remove the bezel ring.
Insure strong downward pressure so the tool doesn't slip out from bezel ring groves.
Install new bezel ring in a clock-wise manner.


Compatible with:

Surefire
(KT4-Cren Side)
M4 (with Crenelated Bezel Ring)
M6 (with Crenelated Bezel Ring)
M971, M972 (with Crenelated Bezel Ring)
M981, M982 (with Crenelated Bezel Ring)


(KT1, KT2, KT3, KT4, KT5 Plastic Ring Side)
KT1 Head Unit (with Flat Plastic Bezel Ring)
KT2 Head Unit (with Flat Plastic Bezel Ring)
KT3 Head Unit (with Flat Plastic Bezel Ring)
KT4 Head Unit (with Flat Plastic Bezel Ring)
KT5 Head Unit (with Flat Plastic Bezel Ring)